3/4/5mm SBS fiberglass reinforcement based modified bitumen PE/Aluminum foil/Sand/Mineral surface torch applied roofing felt Root Resistance waterproofing membrane roll cold weather low temperature
Product Details:
Place of Origin: | China |
Certification: | ISO9001, ISO14001 |
Thickness available: | 3mm, 4mm,5mm |
Width: | 1m or customized |
Length: | 7. 5m, 10m, 15m or customized |
Minimum Order Quantity: | 100 square meters |
Price: | FOB Qingdao USD1.00-5.00/sqm |
Packaging Details: | Tape Plastic Bag |
Delivery Time: | 7 days after order confirmation |
Payment Terms: | T/T, L/C, D/P, or others |
Supply Ability: | 4 million square meters per month |
Description
SBS modified bitumen waterproof membrane, its base materials are fiberglass felt dipped and coated with SBS thermoplastic elastomer modified bitumen, both sides are covered with fine sand, mineral granular, PE film, aluminum foil.
Product Features:
It has good waterproofing and ageing-resistance function, not flowing at highest temperature and no crack at lowest temperature; easy application, no pollution, and long service life, etc. SBS modified bitumen waterproofing membrane is especially suitable to the building waterproofing in cold area and to the buildings of changeable constructions.
Technical data sheet
No. | Items | Class I | Class II | |||||
P | G | P | G | PG | ||||
1 | Soluble Conten (g/m2) | 3mm | ≥2100 | - | ||||
4mm | ≥2900 | - | ||||||
5mm | ≥3500 | |||||||
Test | - | Not Flame | - | Not Flame | - | |||
2 | Heat Resistance | ℃ | 90 | 105 | ||||
mm | ≤2 | |||||||
Test | Not flowing, not dripping | |||||||
3 | Flexibility under Low Temperature | -20℃, no crack | -25℃, no crack | |||||
4 | Impermeability, 30 minutes | 0.3Mpa | 0.2Mpa | 0.3Mpa | ||||
5 | Tension Test | Maximum (N/50mm) | ≥500 | ≥350 | ≥800 | ≥500 | ≥900 | |
Second-Max (N/50mm) | - | - | - | - | ≥800 | |||
Test | Not crack, not apart | |||||||
6 | Elongation | Maximum | ≥30% | - | ≥40% | - | - | |
Second-Max | - | - | - | - | ≥15% | |||
7 | Oil Permeability (pieces) | ≤2 |
Production line:
Application:
It is widely used for the waterproof and damp-proof of the roofs, basements, toilets, industry and civil roofs, bridges, parking area, tunnels, reservoirs, etc.
Attention:
Clean the basement
Paint the primer
Deal with the details
Position, place the datum line
Torch the rolls
Exhaust compaction
Deal with the joint lap
Fix, seal
Clean, check and accept
Advantages
1.Excellent in waterproofing anti-penetration;
2.Causing no damage to the normal growth of plants;
3.High-strength membrane to resist water;
4.Penetration-resisting, wear-resisting, tear-resisting, corrosion-resisting, mould-resisting and weather-resisting;
5.Good tensile strength and elongation;
6.Strong adaptability to shrinkage, deformation and cracks of substrate;
7.Resistant to both high temperature and low temperature.
Storage and Transportation:
1) Separate storage for different models.
2) Temperature should be below 50 ℃.
3) Avoid direct sunshine, rain, keep ventilated.
4) Do not piled horizontally, keep stand and not more than 2 floors.
Why choose us?
*Honest supplier to the worldwide buyers
*Factory, direct supplier, competitive price
* 21 years of production experience
*Warm and friendly service and guide
* Workers of 3 shifts for 24-hour production, high capacity
*Small and big orders are welcome
*24-hour service for you
*Samples are free. We only charge the freight fee which will be refunded once you place the order.
Certification:
Fuhua, one of the largest China manufacturers and suppliers, now brings you 3/4/5mm sbs fiberglass reinforcement based modified bitumen pe/aluminum foil/sand/mineral surface torch applied roofing felt root resistance waterproofing membrane roll cold weather low temperature from its professional factory. Please rest assured to buy.
http://www.china-waterproofing.com/